SAM-930 Self-Adhesive Modified-Bitumen Waterproofing Membrane With Polyester Reinforcement
Product Description
Company Info
Product Description
SAM-930 Self-Adhesive Modified-Bitumen Waterproofing Membrane With Polyester Reinforcement
[Product Description]OR
[Product]Yuhong® SAM-930 self-adhesive polymer modified bituminous membrane with polyester reinforcement consists of high strength polyester as reinforcement and polymeric modified bitumen which is self-adhere at normal temperatures.
On its upper surface is such isolation material as polyethylene film, fine sand or aluminum foil and on the lower surface is peelable silicon-coated isolation film or buckle paper as anti-sticking isolation material.
This product enhances its self-adhesion ability. The product abides by the industry standard JC 898— 2002 "Self-adhesive polyester modified bituminous sheet material using polyester reinforcement for waterproofing".
[Types and Specification]
Or [Type& Scope]Specification
— According to the physical properties, it can be classified into type I and type II.
— According to the upper surface material, it can be classified into polyethylene film(PE) type, fine sand type(S), and aluminum foil(AL) type.
Dimension
— Area: 10m2, 15m2;
— Width: 1000mm;
— Thickness:
A)polyethylene film and fine sand: 2mm, 3mm;
B)Aluminum foil: 2mm, 3mm.
[Physical Property]OR
[Physical and Mechanical Properties]The product meets the industry standard JC 898— 2002 "Self-adhesive polyester modified bituminous sheet material using polyester reinforcement for waterproofing". The properties are listed on table 1
[Advantage]l The system can be cold applied. No fire, heat, or adhesive is used, and there is no environmental threat. Therefore, the product is environmentally-friendly.
L It has strong tensile strength and high elongation, and is suitable to substrate settlement and crack deformation.
L It can produce high strength waterproofing layer and have strong resistance to pressure water.
L It is fatigue-resistant, corrosion-resistant, and resistant to mildew and aging...
L It has good adhesive performance. The joint of membrane has the same life as the material itself.
[Typical Application]It is applicable to non-exposed roofing project subterranean and subterranean project, and can be applied to the waterproof project of engineering such as open-cut subway, tunnel, pool, and aqueduct. It is especially adaptable to the engineering whose construction is prohibited to use naked fire.
Self-adhesive membrane whose upper surface is aluminum foil can be applied to waterproof project of exposed structure of all kinds of architecture.
Self-adhesive membrane by its two sides can be applied only to assistant waterproof engineering, but also to the adhesion and airtightness of the layer joint between two incompatible materials.
[Product Description]OR
[Product]Yuhong® SAM-930 self-adhesive polymer modified bituminous membrane with polyester reinforcement consists of high strength polyester as reinforcement and polymeric modified bitumen which is self-adhere at normal temperatures.
On its upper surface is such isolation material as polyethylene film, fine sand or aluminum foil and on the lower surface is peelable silicon-coated isolation film or buckle paper as anti-sticking isolation material.
This product enhances its self-adhesion ability. The product abides by the industry standard JC 898— 2002 "Self-adhesive polyester modified bituminous sheet material using polyester reinforcement for waterproofing".
[Types and Specification]
Or [Type& Scope]Specification
— According to the physical properties, it can be classified into type I and type II.
— According to the upper surface material, it can be classified into polyethylene film(PE) type, fine sand type(S), and aluminum foil(AL) type.
Dimension
— Area: 10m2, 15m2;
— Width: 1000mm;
— Thickness:
A)polyethylene film and fine sand: 2mm, 3mm;
B)Aluminum foil: 2mm, 3mm.
[Physical Property]OR
[Physical and Mechanical Properties]The product meets the industry standard JC 898— 2002 "Self-adhesive polyester modified bituminous sheet material using polyester reinforcement for waterproofing". The properties are listed on table 1
[Advantage]l The system can be cold applied. No fire, heat, or adhesive is used, and there is no environmental threat. Therefore, the product is environmentally-friendly.
L It has strong tensile strength and high elongation, and is suitable to substrate settlement and crack deformation.
L It can produce high strength waterproofing layer and have strong resistance to pressure water.
L It is fatigue-resistant, corrosion-resistant, and resistant to mildew and aging...
L It has good adhesive performance. The joint of membrane has the same life as the material itself.
[Typical Application]It is applicable to non-exposed roofing project subterranean and subterranean project, and can be applied to the waterproof project of engineering such as open-cut subway, tunnel, pool, and aqueduct. It is especially adaptable to the engineering whose construction is prohibited to use naked fire.
Self-adhesive membrane whose upper surface is aluminum foil can be applied to waterproof project of exposed structure of all kinds of architecture.
Self-adhesive membrane by its two sides can be applied only to assistant waterproof engineering, but also to the adhesion and airtightness of the layer joint between two incompatible materials.
Address:
No.4 Building Kangjiayuan, Gaobeidian North Road, Chaoyang District, Beijing, China
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration
Management System Certification:
ISO 14001, ISO 9001
Main Products:
Waterproof Material, Waterproof Coating, Waterproof Membrane, Waterproofing, Waterproof, Joint Sealant, Construction Sealant
Company Introduction:
Beijing Oriental Yuhong Waterproof Technology Co., Ltd (SZ: 002271) was founded in 1998, committing itself to the research on waterproofing solution systems, has been acknowledged as the leading company on waterproof materials R&D, manufacturing, sales and construction services. It is on the list of the Asia′s 500 most influential brands, national high-tech enterprise, national certified enterprise technology center and the first listed company of Chinese waterproof industry.
Oriental Yuhong holds the shares of Shanghai, Yueyang, Guangdong, Sichuan, Jinzhou Oriental Yuhong, Yunnan Fengxing Waterproof Material Co., Ltd, Xuzhou Woniushan Advanced Waterproof Materials Co., Ltd. and Shandong Tiandingfeng Nonwoven Co., Ltd., Beijing Oriental Yuhong Mining Safety Technology Co., Ltd. It has 8 production bases covering a total area of more than 1,600,000SQM. The products refers to waterproof membranes, waterproof coatings, sealant materials, rigid waterproof and leakage blocking agents, putty powders, surfactants, joint sealants, wallpaper adhesives, wallpaper mucilage, wall covering primer decorative materials and relevant matching products ,etc. It has the annual output of 87,000,000SQM for waterproof membranes, including SBS, APP, self-adhesive and polymer membranes, and 129,800 tons for coating, including polyurethane series, polyurea series, acrylic acid series, cement-based series, bitumen series, etc.
Yuhong waterproof systems are widely applied to general buildings, highways, bridges, subways, tunnels, airports and dams. Oriental Yuhong sticks to globalization. Products can reach various international standards and have been exported to more than 70 countries and regions. We are realizing the great dream of world Oriental Yuhong, fulfilling the goal of taking a position in the Top 5 of the global waterproofing industry, contributing to building harmonious human settlements and fully practicing the enterprise mission of ′to create a sustainable and reliable living environment for human beings′.
.
Oriental Yuhong holds the shares of Shanghai, Yueyang, Guangdong, Sichuan, Jinzhou Oriental Yuhong, Yunnan Fengxing Waterproof Material Co., Ltd, Xuzhou Woniushan Advanced Waterproof Materials Co., Ltd. and Shandong Tiandingfeng Nonwoven Co., Ltd., Beijing Oriental Yuhong Mining Safety Technology Co., Ltd. It has 8 production bases covering a total area of more than 1,600,000SQM. The products refers to waterproof membranes, waterproof coatings, sealant materials, rigid waterproof and leakage blocking agents, putty powders, surfactants, joint sealants, wallpaper adhesives, wallpaper mucilage, wall covering primer decorative materials and relevant matching products ,etc. It has the annual output of 87,000,000SQM for waterproof membranes, including SBS, APP, self-adhesive and polymer membranes, and 129,800 tons for coating, including polyurethane series, polyurea series, acrylic acid series, cement-based series, bitumen series, etc.
Yuhong waterproof systems are widely applied to general buildings, highways, bridges, subways, tunnels, airports and dams. Oriental Yuhong sticks to globalization. Products can reach various international standards and have been exported to more than 70 countries and regions. We are realizing the great dream of world Oriental Yuhong, fulfilling the goal of taking a position in the Top 5 of the global waterproofing industry, contributing to building harmonious human settlements and fully practicing the enterprise mission of ′to create a sustainable and reliable living environment for human beings′.
.
